Embedding the efficiency and accountability principle within Vision 2030.
01
For site engineers, survey engineers and technicians who set up site control, run traverses and levels, stake out works and compute earthwork volumes.
Dates & programme details ↗
02
For technicians, engineers and facilities staff who service genset engines, parallel units, exercise transfer switches and prove standby power under load.
Dates & programme details ↗
03
For water utility operators, engineers and quality staff who run wells, clarifiers, filters and chlorinators and keep treated water safe to the tap.
Dates & programme details ↗
04
For QA/QC inspectors, integrity and inspection engineers who calibrate NDT equipment, interpret indications, select methods and write NDT procedures.
Dates & programme details ↗
05
For technicians and engineers who fit seals and gland packing, align shafts, mount bearings and trace repeat failures back to workshop practice.
Dates & programme details ↗
06
For municipal, consultant and infrastructure engineers who size storm sewers, inlets, ponds and SuDS and protect urban areas from flash floods.
Dates & programme details ↗
07
For structural, civil and integrity engineers who load and check jackets and piles, review lifts and transport, and manage inspection of ageing platforms.
Dates & programme details ↗
08
For MEP engineers, commissioning providers and facility teams who test building systems, close issues and hand over to trained operators.
Dates & programme details ↗
09
For structural, checking and assessment engineers who set seismic loads, verify drift and irregularity, detail ductile frames and walls, and retrofit existing buildings.
Dates & programme details ↗
10
For reservoir engineers, petrophysicists and geologists who plan coring, commission laboratory tests and check SCAL data before it enters models.
Dates & programme details ↗
11
For executive housekeepers and supervisors in hotels, hospitals and residences who set cleaning standards, plan attendant workloads and control housekeeping costs.
Dates & programme details ↗
12
For maintenance engineers and technicians who check sensors, tune servo and stepper drives and trace faults across a machine's trades.
Dates & programme details ↗
13
For rotating equipment engineers and senior technicians who run, control and inspect gas turbines in power plants and oil and gas facilities.
Dates & programme details ↗
14
For civil, geotechnical and site engineers who scope ground investigations, judge soil test data and control excavations, fills and compaction on site.
Dates & programme details ↗
15
For system operators, generation planners and utility engineers who model unit costs and optimise dispatch and commitment with solver tools.
Dates & programme details ↗
16
For product design, manufacturing and industrial engineers who score assemblies, consolidate parts and estimate cost before tooling is committed.
Dates & programme details ↗
17
For process and technical services engineers in petrochemicals and refining who size reactors, control selectivity and manage catalyst life.
Dates & programme details ↗
18
For maintenance, reliability, materials and procurement engineers who reproduce obsolete or long-lead parts from a worn sample through to an approved first article.
Dates & programme details ↗
19
For geologists, geophysicists and drilling and wellsite engineers who forecast formation pressure, set the mud-weight window and watch for overpressure.
Dates & programme details ↗
20
For water network engineers, modellers and leakage teams who size mains, calibrate hydraulic models, zone pressure and run DMAs to cut real losses.
Dates & programme details ↗
21
For piping, rotating and static equipment engineers who check line flexibility, size supports and hangers, limit nozzle loads and issue stress reports.
Dates & programme details ↗
22
For drilling, mud and cementing engineers who formulate and test mud, design cement slurries and plan primary and remedial cement jobs.
Dates & programme details ↗
23
For signalling engineers, project and O&M staff on metro and mainline railways who compare train control systems, calculate headway and prepare safety cases.
Dates & programme details ↗
24
For drilling engineers, rig supervisors and wellsite crews who set back-pressure, read the operations matrix and run connections under applied pressure.
Dates & programme details ↗
25
For mechanical, process and HVAC engineers who set up, run and review CFD studies, from geometry clean-up and meshing to verification and reporting.
Dates & programme details ↗
26
For production chemists, process and production engineers who read water analyses, qualify inhibitors and demulsifiers and set injection doses.
Dates & programme details ↗
27
For subsea pipeline, riser and installation engineers who size wall thickness, check stability and spans, choose lay methods and specify risers and umbilicals.
Dates & programme details ↗
28
For exploration geologists, geochemists and basin modellers who screen source rocks, correlate oils and model charge timing to risk prospects.
Dates & programme details ↗
29
For bridge, structural and highway asset engineers who inspect bridges, rate their capacity and plan strengthening, bearing and joint works.
Dates & programme details ↗
30
For plant, terminal, filling and HSE staff who run LPG spheres, tanker and ship transfers, cylinder filling and delivery, and guard against BLEVE.
Dates & programme details ↗
31
For production, completion and reservoir engineers who diagnose damage, design acid and fracture treatments, interpret DFIT data and judge post-job results.
Dates & programme details ↗
32
For drilling engineers, wellsite supervisors and rig crew leads who read warning signs, free stuck strings and decide when fishing stops and a sidetrack starts.
Dates & programme details ↗
33
For offshore terminal, marine, maintenance and integrity staff who inspect buoy hoses, hawsers, swivels and anchor chains and plan hose change-outs.
Dates & programme details ↗
34
For pipeline, maintenance, integrity and welding engineers who plan live connections and isolations and choose repairs for operating lines.
Dates & programme details ↗
35
For process engineers and operators in chemical, fertiliser, mineral salt and pharmaceutical plants who run, size and troubleshoot crystallisers.
Dates & programme details ↗
36
For process, operations and planning engineers who run cracking furnaces, cold sections and splitters and must pick feeds that raise olefin margin.
Dates & programme details ↗
37
Operators, technicians and process engineers learn to run, maintain and audit industrial refrigeration plant in gas, petrochemical, food and cold storage sites.
Dates & programme details ↗
38
For instrument, control and automation engineers and technicians who configure smart devices, design fieldbus segments and diagnose plant network faults.
Dates & programme details ↗
39
For coating inspectors and corrosion, integrity and maintenance engineers who select coating systems, control surface preparation and test applied films.
Dates & programme details ↗
40
For production and reservoir engineers and log analysts who plan PLT surveys, calibrate spinners, allocate zonal rates and choose the right workover.
Dates & programme details ↗
41
For production, completion and maintenance engineers and wellhead technicians who install, pressure test, grease and repair surface well equipment.
Dates & programme details ↗
42
For station developers, engineers, inspectors and operators who size, lay out, commission and inspect CNG, LNG and L-CNG vehicle fuelling stations.
Dates & programme details ↗
43
For design engineers, panel builders and consultants who specify, size and verify distribution boards, MCCs and control panels before they are built.
Dates & programme details ↗
44
For power system, protection, control-room and planning engineers who turn PMU data into oscillation, stability and post-event insight.
Dates & programme details ↗
45
For pipeline operations, integrity and maintenance staff who run pig traps, clean lines for inspection, choose ILI tools and turn results into dig lists.
Dates & programme details ↗
46
For mechanical, structural and design engineers who build, verify and review FEA models of brackets, frames, pressure parts and machine components.
Dates & programme details ↗
47
For drilling engineers, directional supervisors and placement geologists who engineer trajectories, clear offset wellbores and steer laterals in the pay zone.
Dates & programme details ↗
48
For maintenance, reliability, engineering, spares and supply chain managers who track end-of-life parts and act before supply loss stops critical assets.
Dates & programme details ↗
49
For spa directors, resort operations and wellness development staff who price treatment menus, roster therapists, run wet areas and own the spa P&L.
Dates & programme details ↗
50
For exploration geologists, geophysicists and new ventures teams who map fairways, test traps and seals, and rank prospects before drilling.
Dates & programme details ↗
51
For pipeline operations, control room, integrity and HSE engineers who select, tune and test leak detection and act on leak alarms.
Dates & programme details ↗
52
For process, operations and technical services specialists who load and sulphide beds, manage quench and treat gas, and extend hydroprocessing cycles.
Dates & programme details ↗
53
For piping, corrosion, civil, maintenance and QA/QC engineers who specify, install and examine GRP pipe, wound tanks, FRP gratings and repair wraps.
Dates & programme details ↗
54
For transport planners, modellers and road and transit authority staff who build demand forecasts and appraise corridor investment options.
Dates & programme details ↗
55
For production, facilities, water treatment and reservoir engineers who size de-oiling stages, set injection water specs and keep injectors open.
Dates & programme details ↗
56
For pipeline, water utility, process and mechanical engineers who model pressure transients, size surge vessels and air valves and set safe operating limits.
Dates & programme details ↗
57
For superintendents, chief engineers, bunker buyers and claims staff who control sampling and quantity evidence and recover losses on bad fuel.
Dates & programme details ↗
58
For planners, municipal engineers and public-realm designers who reallocate street space to walking, cycling and transit and test changes with pilots.
Dates & programme details ↗
59
For production, reservoir and facilities engineers who screen steam methods, design thermal wells, size lift for viscous crude and treat tight emulsions.
Dates & programme details ↗
60
For oil movement, terminal, offsites and hydrocarbon accounting staff who line up transfers, calculate tank stock, reconcile inventory and cut losses.
Dates & programme details ↗
61
For resident engineers, inspectors and consultant staff who review submittals, release hold points, certify quantities and accept completed works.
Dates & programme details ↗
62
For facility, maintenance, consultant and municipal engineers who inspect roofs, facades and waterproofing, rate defects and plan funded rehabilitation.
Dates & programme details ↗
63
For reservoir, petroleum and production engineers who validate fluid samples and lab reports, tune EOS models and build fluid tables for simulation.
Dates & programme details ↗
64
For utility planning, pricing and customer programme staff who profile load, design demand response offers and prove the peak reduction they deliver.
Dates & programme details ↗
65
For process, operations and technical-service specialists who run FCC, naphtha reformer and coker sections and must trace upsets to root cause.
Dates & programme details ↗
66
For test, laboratory and R&D engineers who wire sensors, condition signals, program acquisition and automate bench instruments and result logging.
Dates & programme details ↗
67
For civil and structural engineers who build frame models, set loads, run analyses and check steel code checks and concrete design output in software.
Dates & programme details ↗
68
For facilities, project, construction and operations engineers who modify producing platforms, fit tie-ins into shutdowns and hand systems to operations.
Dates & programme details ↗
69
For process, plating, maintenance and quality engineers who control plating baths, current density and rectifier energy and fix deposit defects on the line.
Dates & programme details ↗
70
For process, facilities and operations engineers who build gas plant flowsheets, match them to plant data and extend them into dynamic runs.
Dates & programme details ↗
71
For drilling supervisors, rig superintendents, QHSE and asset integrity staff who survey rig systems, rate findings and close them before spud.
Dates & programme details ↗
72
For piping, pipeline, maintenance and operations engineers who specify gate, ball and check valves, witness seat tests and fix passing isolations.
Dates & programme details ↗
73
For electrical, renewables and asset engineers who size, wire, test and run utility-scale PV plants to a measurable performance ratio.
Dates & programme details ↗
74
For rotating equipment, reliability and design engineers who review vendor lateral and torsional analyses and fix high-speed rotor vibration problems.
Dates & programme details ↗
75
For lifting, installation and project engineers and lift supervisors who select cranes, calculate rigging and ground loads, and sign engineered lift plans.
Dates & programme details ↗
76
For HVAC, facilities and district cooling engineers who lay out chilled water loops, stage chillers, size VRF circuits and trace plant faults.
Dates & programme details ↗
77
For developers, project managers, engineers and contractors who select offsite building systems and plan factory, transport and site assembly for housing and hotels.
Dates & programme details ↗
78
For line design, construction and maintenance engineers who rate conductors, set sag-tension, supervise stringing and plan line inspection and refurbishment.
Dates & programme details ↗
79
For rig specialists and supervisors who size tubulars, lay out stabilisers, calibrate friction and tune nozzle flow for inclined wellbores.
Dates & programme details ↗
80
For reservoir, production and asset engineers who diagnose decline, find bypassed oil and rank infill, workover and shut-off options on late-life fields.
Dates & programme details ↗
81
For drilling, completion and well design engineers who size casing for hot, overpressured wells, derate for temperature and pick grades and connections.
Dates & programme details ↗
82
For site electrical engineers, supervisors, contractors and HSE staff who plan, install and inspect generator-fed boards, cable runs and RCD protection.
Dates & programme details ↗
83
For production, operations, automation and asset managers who turn live well data into exception-based surveillance, remote operation and a phased rollout.
Dates & programme details ↗
84
For geologists, geomodellers, petrophysicists and reservoir engineers who build 3D geomodels, model facies and quantify in-place volume uncertainty.
Dates & programme details ↗
85
For process, chemical and mechanical engineers who calculate thermal duties, insulation, furnace radiation, absorber transfer units and cooling tower approach.
Dates & programme details ↗
86
For exploration geologists, database managers and lab liaison staff who design control samples, review assay batches and audit laboratories before modelling.
Dates & programme details ↗
87
For process, operations and environmental engineers who run caustic wash towers and sweetening treaters and choose an outlet for each spent caustic batch.
Dates & programme details ↗
88
For superintendents, port staff, surveyors and marine underwriters who check stability booklets, hull structure, machinery and class status of ships.
Dates & programme details ↗
89
For integrity, geotechnical and route engineers who rank landslide, subsidence, fault and scour sites, estimate pipe strain and plan monitoring.
Dates & programme details ↗
90
For piping engineers, site supervisors and inspectors who size PE lines, supervise fusion joints, plan trenchless installs and sign off pressure tests.
Dates & programme details ↗
91
For materials, QA/QC, failure analysis and R&D lab staff who choose techniques, prepare specimens and read micrographs, spectra and thermograms.
Dates & programme details ↗
92
For instrument, electrical and electronics technicians who measure boards, isolate failed components in supplies and I/O cards, and rework them under ESD control.
Dates & programme details ↗
93
For offshore operations, marine, maintenance and integrity crews who run turret, cargo, offloading and marine systems and inspect hulls on floating units.
Dates & programme details ↗
94
For process, operations, mechanical and HSE engineers who tune refrigerant loops, diagnose exchangers and compressors and restart trains safely.
Dates & programme details ↗
95
For DPAs, fleet managers, superintendents, masters and SMS auditors who run the DPA role, close non-conformities and prepare ships for DOC and SMC audits.
Dates & programme details ↗
96
For pipeline, project, construction and field quality engineers who size new lines, sequence the spread, accept girth welds and run hydrotests to handover.
Dates & programme details ↗
97
For reliability, maintenance and process engineers who build hybrid equipment models, virtual measurements and scenario runs that change plant decisions.
Dates & programme details ↗
98
For R&D chemists in petrochemicals, catalysis and polymers who rank candidates by calculation and check computed results against bench data.
Dates & programme details ↗
99
For biostratigraphers, rig geologists and laboratory staff who date borehole sections, steer horizontal wells and zone fields with microfossil evidence.
Dates & programme details ↗
100
For highway engineers, design consultants and road authority staff who audit new schemes by stage, inspect live roads and rank crash blackspots.
Dates & programme details ↗
101
For network planners, grid engineers and gas control staff who size meshed mains, set regulator cascades, manage line pack and dispatch gas.
Dates & programme details ↗
102
For procurement, finance, HR, legal and admin teams who approve purchases, budgets and contracts for plant equipment, power systems and building works.
Dates & programme details ↗
103
For maintenance managers, planners and plant engineers who build budgets from cost drivers, explain variances and justify equipment replacement to finance.
Dates & programme details ↗
104
For marine operations, port, fleet and junior deck staff who check ECDIS settings, read radar and sensor data and prepare passage plans for real voyages.
Dates & programme details ↗
105
For cost controllers, planners and operations managers who budget fields, control AFEs and cut refinery cost per barrel against peer benchmarks.
Dates & programme details ↗